HDMI光端机 HDMI光纤延长器 单模单纤 FC/ SC光口 20KM 红外

USER  MANUAL

PW-THF104

HDMI Fiber Optic Transmission


　　1.0 Introduction
　　2.0 Panel Description 
　　3.0 Function Specification
　　4.0 Connection and operation



Introduction
PW-THF104 is a perfect solution for transmitting HDMI audio and video through the fiber, the set of device includes a sender of PW-THF104T and a receiver of PW-THF104R.  Our products transmit the HD video over optical fiber, which making the images clearer as well as the transmission more stable.  At the same time, the product has the built-in IR remote control function. 
　　　
2.0  Panel Description
　　2.1  Front Panel


　	HDMI TX	HDMI RX
HDMI PORT	Video Input	Video Output
IR PORT	IR Input	IR Output
Fiber Port SC	Optic-fiber Data Transmission
RESET KEY	Hold down the key for 8 seconds after power on, the model will restore default settings

　　2.2  Indicator led. 
Indicator led	Status
FX	Light On	The transmission rate is correct
	Light Off	The transmission rate is not correct
Link act	Light On	Fiber Link up
	Flash	Packets of data are transmitting in the indicating port
Dpx	Light On	In the State of full-duplex
	Light Off	In the State of half-duplex


3.0  Function Specification
>	HDMI 1.3/HDCP1.1 & 1.2
>	Both Optic-fiber transmission and Ethernet Transmission 
>	Support point-to-point mode, one point-to-many mode and cascaded transmission mode.    
>	built-in IR remote control function, you can control the set-top box at the receiving site using the IR remote control. 
>	Pure hardware design, just plug and play, no need to install extra software.
Video Parameter	　
Video Resolution	640X480 @ 60fps    800X600 @ 60fps 
	1024X600 @ 60fps   1024X768 @ 60fps 
	1152X864 @ 60fps   1280X600 @ 60fps
	1280X720@ 60fps    1280X768@ 60fps
	1280X800@ 60fps    1280X960@ 60fps
	1280X1024@ 60fps   1440X1050@ 60fps
	1440x900 @ 60fps   1600x900 @ 60fps 
	1660x1200 @ 60fps  1680x1050 @ 60fps 
	1920x1080 @ 60fps  1920 x1200 @ 60fps
Audio	32kHz, 44.1kHz and 48kHz
Infrared Support	38KHz; NEC code
HDMI Version	HDMI 1.3
HDCP Version	HDCP 1.2
Other Parameters	　
Power input	AC input: 100V - 240V (50 - 60Hz) 
Max Power Consumption	DT100FT: 5W
	DT100FR: 5W
Size (L-W-H)	　182×100×37 mm
Net Weight	　460g*2pcs
Operating Temperature/Humidity	0℃  - 70℃  / 10% - 80%RH(no condensation)
Storage Temperature/Humidity	-10℃  - 80℃/ 5% -90% RH(no condensation)


Fiber Parameter

Product Model	MaxDistance	Fiber type	OpticalInterface	WaveLength	OpticalPower	ReceivingSensitivity	Link Budget
DT101F-D550	550M	multimode	SC	850nm	-9~-3dBm	-26dBm	-17dBm
							
DT101F-S20	10-20KM	singlemode	SC	1310nm	-11~-3dBm	-36dBm	-25dBm
				1510nm	-11~-3dBm	-36dBm	-25dBm
DT101F-S40	40KM	singlemode	SC	1310nm	-5~0dBm	-36dBm	-31dBm
				1510nm	-5~0dBm	-36dBm	-31dBm
 Connection and operation
Please connect the HDMI ** source to the PW-THF104T。
Connect PW-THF104Rto the HD displayer.
Between PW-THF104Tand PW-THF104 R(SC port-to-SC port) use optical fiber to connect.
IR remote control function, connect the IR receiver to the HDMI TX and connect the IR transmitter to the HDMI RX. 
Power on the device, POWER light on, then it will do the self-checking job with the other indictors blinking automatically.  When the Link light flash, the device starts up. 

Application diagram